Sterndrive Boat 3D 모델

$9.99
Sterndrive Boat 3D 모델
$ 9.99
제거 이 아이템 북마크
  • 이용 가능한 포맷:
    Autodesk FBX: fbx 990.77 kb
    Wavefront OBJ: obj 910.04 kb
    Stereolithography: stl 506.37 kb
  • 애니메이티드:
    No
  • 텍스쳐드:
    No
  • 리그드:
    No
  • 재료:
  • 로우 폴리곤:
    No
  • 컬렉션:
    No
  • UVW 매핑:
    No
  • 플러그인 사용 됨:
    No
  • 프린트 준비:
    No
  • 3D 스캔:
    No
  • 성인용 콘텐츠:
    No
  • PBR:
    No
  • 지오메트리:
    Polygonal
  • 언래핑 된 UVs:
    Unknown
  • 조회:
    1646
  • 날짜:
  • 아이템 ID:
    440318
  • 평점:
A sterndrive or inboard/outboard drive (I/O) is a form of marine propulsion which combines inboard power with outboard drive. The engine sits just forward of the transom while the drive unit (outdrive or drive leg) lies outside the hull.The drive unit (outdrive) carries power from the inboard engine, typically mounted above the waterline, outboard through the transom and downward to the propeller below the waterline.

The outdrive resembles the bottom half of an outboard motor and is composed of two sub-units: an upper containing a driveshaft connected through the transom to an engine which transmits power to a 90-degree-angle gearbox; and the lower containing a vertical driveshaft receiving power from the upper unit gearbox, transmitted through another 90-degree-angle gearbox to the propeller shaft. 프린트 준비: 아니오
다른 포맷이 필요하세요?
다른 포맷이 필요하시면, 새로운 지원 티켓을 열어 요청하세요. 저희는 3D 모델을 다음으로 변환할 수 있습니다: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. 우리는 3D 장면을 변환하지 않습니다 .step, .iges, .stp, .sldprt와 같은 형식도 포함됩니다.!

다운로드 Sterndrive Boat 3D 모델 fbx obj stl 발신 Norezero

sterndrive boat watercraft drive recreational hull engine ship vessel yacht duoprop inboard marine outboard engineering propeller propulsion powerboat
이 아이템에 대한 코멘트 없음.