sd kfz 234-2 puma 3D 모델

$70.00
sd kfz 234-2 puma 3D 모델
$ 70.00
제거 이 아이템 북마크
  • 이용 가능한 포맷:
    3DS MAX ver.2013: max2013 17.59 MB
    렌더: VRay 2.0
    Autodesk FBX: fbx 17.53 MB
    Wavefront OBJ: obj 14.55 MB
  • 폴리곤:
    319307
  • 버텍스:
    317032
  • 애니메이티드:
    No
  • 텍스쳐드:
  • 리그드:
    No
  • 재료:
  • 로우 폴리곤:
    No
  • 컬렉션:
    No
  • UVW 매핑:
  • 플러그인 사용 됨:
    No
  • 프린트 준비:
    No
  • 3D 스캔:
    No
  • 성인용 콘텐츠:
    No
  • PBR:
    No
  • 지오메트리:
    Polygonal
  • 언래핑 된 UVs:
    Non-overlapping
  • 조회:
    6687
  • 날짜:
  • 아이템 ID:
    287060
  • 평점:
the sd.kfz. 234 , was a family of armoured cars designed and built in germany during world war ii. the vehicles were lightly armoured, armed with a 20, 50 or 75 mm main, and powered by a tatra v12 diesel engine. the sd.kfz. 234 broadly resembles the appearance of sd.kfz. 231 (8 rad). the 234/2 puma has a 5 cm kwk 39 l/60, 1 x mg 42. employed a fully enclosed turret originally designed for the vk 1602 leopard light tank. the turret front was protected by 30 mm (1.2 in) armor at an angle of 20° from the vertical. the sides and rear had 10 mm armor set at 25°, and the top plate was 10 mm (0.39 in) armor. the mantlet was rounded and was 40 to 100 mm (1.6 to 3.9 in) thick. 101 built between september 1943 and september 1944. 프린트 준비: 아니오
다른 포맷이 필요하세요?
다른 포맷이 필요하시면, 새로운 지원 티켓을 열어 요청하세요. 저희는 3D 모델을 다음으로 변환할 수 있습니다: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. 우리는 3D 장면을 변환하지 않습니다 .step, .iges, .stp, .sldprt와 같은 형식도 포함됩니다.!

다운로드 sd kfz 234-2 puma 3D 모델 max2013 fbx obj 발신 mermodels

schwarer sdkfz sdkfz234 military ifv armoured 8x8 iiww whermacht tank german
이 아이템에 대한 코멘트 없음.