s64f skycrane 3D 모델

$110.00
s64f skycrane 3D 모델
$ 110.00
제거 이 아이템 북마크
  • 이용 가능한 포맷:
    3DS MAX all ver.: 3ds 5.69 MB
    Cinema4D: c4d 6.24 MB
    Collada: dae 4.76 MB
    ArchiCAD (native): dxf 7.16 MB
    Autodesk FBX: fbx 11.67 MB
    Wavefront OBJ: obj 5.95 MB
  • 폴리곤:
    41738
  • 버텍스:
    43676
  • 애니메이티드:
    No
  • 텍스쳐드:
  • 리그드:
    No
  • 재료:
  • 지오메트리:
    Polygonal
  • 조회:
    5321
  • 날짜:
  • 아이템 ID:
    66332
  • 평점:
s-64f skycrane with nose radar and water tank for fire suppression
polygons 41738
vertices 43676
this model is only artistic representation of the subject matter. i made it for a flight magazine illustration. if you like the model please rate it.

the s-64 skycrane is an american twin-engine heavy-lift helicopter. it is the civil version of the united states army's ch-54 tarhe.
the aircrane can be fitted with a 2,650-gallon 10,000 litre fixed retardant tank to assist in the control of bush fires, and it has proved itself admirably in this role.
s-64 aircranes have been sold to the italian and korean forest services for fire suppression and emergency response duties. those in the manufacturer air-crane fleet are leased worldwide to organizations, companies, and federal government agencies for either short-term or longer term use in fire suppression, civil protection, heavy lift construction, and timber harvesting.
general characteristics
• crew: 2 pilot, co-pilot, plus room for one rear-facing observer
• capacity: up to 5 total persons
• payload: 20,000 lb 9,072 kg
• length: 70 ft 3 in 21.41 m fuselage
• rotor diameter: 72 ft 0 in 21.95 m
• height: 18 ft 7 in 5.67 m
• disc area: 4070 ft? 378.1 m?
• empty weight: 19,234 lb 8,724 kg
• max. takeoff weight: 42,000 lb 19,050 kg
• powerplant: 2 ? pratt & whitney jftd12-4a t73-p-1 turboshaft engines, 4,500 shp 3,555 k w each
performance
• maximum speed: 109 knots 126 mph, 203 km/h
• cruise speed: 91 knots 105 mph, 169 km/h
• range: 200 nmi 230 mi, 370 km max fuel and reserves
• rate of climb: 1,330 ft/min 6.75 m/s
다른 포맷이 필요하세요?
다른 포맷이 필요하시면, 새로운 지원 티켓을 열어 요청하세요. 저희는 3D 모델을 다음으로 변환할 수 있습니다: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. 우리는 3D 장면을 변환하지 않습니다 .step, .iges, .stp, .sldprt와 같은 형식도 포함됩니다.!

다운로드 s64f skycrane 3D 모델 3ds c4d dae dxf fbx obj 발신 tartino

s-64f s-64 s-64e skycrane sky crane helicopter lifter fire suppression heavy
이 아이템에 대한 코멘트 없음.