English
Español
Deutsch
日本語
Polska
Français
中國
Українська
Italiano
Nederlands
Türkçe
Português
Bahasa Indonesia
Русский
हिंदीPuggle 3D 프린트 모델
- 이용 가능한 포맷: Stereolithography: stl 61.93 MB
- 컬렉션:No
- 밀리미터 폭:48
- 밀리미터 넓이:100
- 밀리미터 깊이:111
- 프린트 준비:
- 3D 스캔:No
- 성인용 콘텐츠:No
- PBR:No
- 조회:1574
- 날짜: 2022-08-12
- 아이템 ID:410722
- 평점:
Puggle dog hi-poly model for 3D printing
puggles are a cross breed of the pug and beagle.
This crossbreed is sometimes classified as a designer dog.
The set includes 2 files: STL and OBJ formats
height 100mm
width 48mm
length 111mm
It is recommended to use support during printing
This model has been tested on an FDM 3D printer
No bugs were detected during 3D printing
It is possible to make small adjustments to this model for free
If you have any questions I will be glad to reply them
더 보기puggles are a cross breed of the pug and beagle.
This crossbreed is sometimes classified as a designer dog.
The set includes 2 files: STL and OBJ formats
height 100mm
width 48mm
length 111mm
It is recommended to use support during printing
This model has been tested on an FDM 3D printer
No bugs were detected during 3D printing
It is possible to make small adjustments to this model for free
If you have any questions I will be glad to reply them
다른 포맷이 필요하세요?
다른 포맷이 필요하시면, 새로운 지원 티켓을 열어 요청하세요. 저희는 3D 모델을 다음으로 변환할 수 있습니다: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. 우리는 3D 장면을 변환하지 않습니다 .step, .iges, .stp, .sldprt와 같은 형식도 포함됩니다.!
다른 포맷이 필요하시면, 새로운 지원 티켓을 열어 요청하세요. 저희는 3D 모델을 다음으로 변환할 수 있습니다: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. 우리는 3D 장면을 변환하지 않습니다 .step, .iges, .stp, .sldprt와 같은 형식도 포함됩니다.!
다운로드 Puggle 3D 프린트 모델 stl 발신 stereocat
dog pug beagle animal stl obj printabe printready이 아이템에 대한 코멘트 없음.
