micrometer and calipers physics low-poly 로우 폴리곤 3D 모델

low poly model pbr texture

basecolor
height
metallic
normal
roughness

micrometer.
modern micrometer with a reading of 1.64 mm ± 0.005 mm. assuming no zero error, this is also the measurement. a micrometer (/maɪˈkrɒmɪtər/ my-krom-i-tər), sometimes known as a micrometer screw gauge, is a device incorporating a calibrated screw widely used for accurate measurement of components[1] in mechanical engineering and machining as well as most mechanical trades, along with other metrological instruments such as dial, vernier, and digital calipers. micrometers are usually, but not always, in the form of calipers (opposing ends joined by a frame). the spindle is a very accurately machined screw and the object to be measured is placed between the spindle and the anvil. the spindle is moved by turning the ratchet knob or thimble until the object to be measured is lightly touched by both the spindle and the anvil.

calipers a caliper (british spelling also calliper, or in plurale tantum sense a pair of calipers) is a device used to measure the distance between two opposite sides of an object. many types of calipers permit reading out a measurement on a ruled scale, a dial, or a digital display. but a caliper can be as simple as a compass with inward or outward-facing points. the tips of the caliper are adjusted to fit across the points to be measured and then the caliper is then removed and the distance read by measuring between the tips with a measuring tool, such as a ruler. 프린트 준비: 아니오