hookah 5 litres in my pocket killer traditional hookahs hookah shaft adapter hookah 3D 프린트 모델

$5.00
hookah 5 litres in my pocket killer traditional hookahs hookah shaft adapter hookah 3D 프린트 모델
$ 5.00
제거 이 아이템 북마크
  • 이용 가능한 포맷:
    Stereolithography: stl 79.68 kb
    Stereolithography: stl 20.85 kb
    Stereolithography: stl 22.86 kb
  • 컬렉션:
    No
  • 너비 (센티미터):
    6.3
  • 밀리미터 폭:
    63
  • 밀리미터 넓이:
    31
  • 밀리미터 깊이:
    63
  • 프린트 준비:
  • 3D 스캔:
    No
  • 성인용 콘텐츠:
    No
  • PBR:
    No
  • 조회:
    3353
  • 날짜:
  • 아이템 ID:
    206674
  • 평점:
brief description: this is mine of hookah -this model is a killer traditional hookahs, this kind of periodic adapter for connection not connecting, as having any 5 litre bottle (with a lid 44mm) from water +any aluminum 0.5 l can of beer or fanta+1 ball from a children's pneumatics 6mm+ 2 cropping the transparent hose from a water level of 10 mm (5 meters is 116 rubles in any hardware store) you can arrange the smoking of this hookah, i have 3 times experienced the difference with the coolest club hookahs are not felt.
manual print: print hips and abs, table 110, 245 with the extruder nozzle 0.4 mm, the thickness of the walls and top with bottom 1.2 mm, infill 25%, glass+hairspray , the desired blowout print, support, put an "edge" otherwise starts to come unstuck at the edges, then trimmed with a knife. weight details 38,77 grams, the flow rate 1.75 filament 16.1 meter.who need can make the shaft for 2,3,4 hoses, but there must be more valves to build, hemorrhagic. that's all she wrote.
user manual: when assembling the mine, look at the groove and tooth groove, the shaft is wound on a 5 liter cylinder, the top is tightly inserted aluminum can upside down (the force of separation of 3-5 kg), the hose is tightly and hermetically inserted, the bottom of the can is a bowl of hookah, in which it is necessary to make holes awl, a needle will not work, the bottom is thick. make a charcoal bowl out of foil. all set. for morons who like to blow back into the hookah there is a check valve, the smoke will come out on the right and the liquid will not go into the jar. if you have problems with tightness, glue "moment" nah, but then not tell
settings: you can raise and lower the tube shaft by adjusting the suction resistance and the level of liquid in the flask, you can twist the bank by adjusting the length of the path that p***** the smoke, so you can stick the tube shaft straight into the jar for swirls. the distance from tobacco to coals can also be adjusted with foil and its thickness. air blowing is regulated by the degree of twisting of the shaft. in general, everything comes with experience. i'm not a hookah, but 2 times has learned.
advantages:
1.small size (like a hockey puck);
2. it is easy to clean, the main polluting elements can be thrown out without regret on a garbage can;
3. a wide range of settings;
4. the design is very resistant to overturning;
5. well, just unusual, original and practical.
disadvantages: kind of suspicious.
password by abcde77@yandex.ru
다른 포맷이 필요하세요?
다른 포맷이 필요하시면, 새로운 지원 티켓을 열어 요청하세요. 저희는 3D 모델을 다음으로 변환할 수 있습니다: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. 우리는 3D 장면을 변환하지 않습니다 .step, .iges, .stp, .sldprt와 같은 형식도 포함됩니다.!

다운로드 hookah 5 litres in my pocket killer traditional hookahs hookah shaft adapter hookah 3D 프린트 모델 stl stl stl 발신 FerrumRus

hookah adapter handmade
이 아이템에 대한 코멘트 없음.