Detachable icebreaking bow Self propelled for Tug Boat 1-32 Vessel 3D 프린트 모델

$89.00
라이센스: 기본 라이센스
No AI Training
Detachable icebreaking bow Self propelled for Tug Boat 1-32 Vessel 3D 프린트 모델
$ 89.00
제거 이 아이템 북마크
  • 컬렉션:
    No
  • 프린트 준비:
    Yes
  • 3D 스캔:
    No
  • 성인용 콘텐츠:
    No
  • PBR:
    No
  • AI 훈련:
    No
  • 조회:
    914
  • 날짜:
  • 아이템 ID:
    478717
  • 평점:
이 아이템 신고하기

Detachable icebreaking bow. Self-propelled with dual Voith Schneider. Scale 1:32 for Jonny harbor tug.
Optimized for 250mm printers.
Prepared for Voit Schneider drives from Bauer models.

https://www.bauer-modelle.com/epages/Bauer_Uwe46269592.sf/de_DE/?ObjectPath=/Shops/Bauer_Uwe46269592/Products/4.9100

Use resin printers for small parts!

Only suitable for experienced model builders!

Data must be cut depending on the installation space! Any STL editor can do this!

The data can also be played together in the editor. This automatically gives you a plan showing how the part has to be assembled!

If you have no idea how to use editor software or your printer, you shouldn't buy it! FDM printers (those with the long thread on the roll) are unsuitable for some delicate parts!
-----------------------------------------------------------------------------------------------------------------
Vorbereitet für Voit Schneider Antriebe von Bauer Modelle.

https://www.bauer-modelle.com/epages/Bauer_Uwe46269592.sf/de_DE/?ObjectPath=/Shops/Bauer_Uwe46269592/Products/4.9100

Optimiert für 250mm Drucker.

Für Kleinteile Resindrucker verwenden!

Nur für erfahrene Modellbauer geeignet!

Daten müssen je nach Bauraum geschnitten werden! Dies kann jeder STL Editor!

Im Editor lassen sich die Daten auch zusammen spielen. So erhält man automatisch einen Plan in dem zu sehen ist wie das Teil zusammengebaut werden muß!

Wer keine Ahnung mit dem Umgang von Editor Software oder seinem Drucker hat sollte besser nicht kaufen! FDM Drucker ( das sind die mit dem langen Faden auf der Rolle ) sind für einige filigrane Teile ungeeignet!

다른 포맷이 필요하세요?
다른 포맷이 필요하시면, 새로운 지원 티켓을 열어 요청하세요. 저희는 3D 모델을 다음으로 변환할 수 있습니다: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. 우리는 3D 장면을 변환하지 않습니다 .step, .iges, .stp, .sldprt와 같은 형식도 포함됩니다.!
더 보기

다운로드 Detachable icebreaking bow Self propelled for Tug Boat 1-32 Vessel 3D 프린트 모델 stl 발신 haller3d

vessel watercraft ship vehicle offshore character figuren figure figurines crane model building railway diorama icebreaking icebreaker tugboat tug miniatures vehicles
이 아이템에 대한 코멘트 없음.

관련 아이템 발신 Detachable icebreaking bow Self propelled for Tug Boat 1-32 Vessel